3800 About to order a MPS

[syP]

Since i am getting my headers on next weekend... I was gunna order a MPS so i can easily swap when i go to the track, or if im takin a long trip and dont need a really small pulley on...

My question is, regaurdless of what mps i get, what size pulleys should i get. I am thinking 2. 1 would be a 3.25" but what should i get for the other? 3.1" be feasable? Or do you rguys think i should order a 3.4" and a 3.1" ?

also which do you guys prefer Intense or ZZP mps?

any input would be great.

Click to read more...

 

[Fish]

Get a 3.4 a 3.2 and a 3.0.

Doesnt really matter I think, but Id go intense anyway.

 

[MrT]

Originally posted by Fish@Oct 31 2004, 12:57 PM
Get a 3.4 a 3.2 and a 3.0.

Doesnt really matter I think, but Id go intense anyway.

[snapback]58767[/snapback]​

maybe Bumpin' can chime in with an un-biased opinion??? :lol:

 

[zeez gtp]

3.4 and a 3.1, that sounds good.

 

[JonPGTP1]

umm i'd say 3.3 and 3.2....3.4 is too big = no fun. 3.1 = too small.

 

[zeez gtp]

Originally posted by JonPGTP1@Oct 31 2004, 02:52 PM
umm i'd say 3.3 and 3.2....3.4 is too big = no fun. 3.1 = too small.

[snapback]58773[/snapback]​

i say 3.4 because last time he scanned and he had 11* of kr.

Ryan, you really need to get a scan and see where you can go, you should get a 3.4 and 3.2, and then go from there.

 

[BumpinGTP]

11* KR??? throw some race gas in to see if it goes away, it could be false

 

[dole21]

i've got pullies of both....


they're the same thing...go with whatever one is cheaper if there is one.

 

[syP]

so intense and zzp are interchangeable?

 

[BumpinGTP]

yes

 

[syP]

will a 3.1" pulley's belt fit a 3.25" pulleys belt? or will i have to buy a smaller belt?

 

[Adam86]

from intense's website:

M90 no intercooler - W-body:


GB6-660 - 6-rib, 3.20" - 3.50"
GB6-650 - 6-rib, 2.90" - 3.10"
GB6-642 - 6-rib, 2.70" - 2.80" (+$3.00)
M90 no intercooler - G or H-body:


GB6-715 - 6-rib, 3.20" - 3.50" (+$18.00)
GB6-710 - 6-rib, 2.90" - 3.10" (+$11.00)
GB6-705 - 6-rib, 2.70" - 2.80" (+$7.00)
M90 with 1.91" thick intercooler - W-body:


GB6-680 - 6-rib, 2.90" - 3.00" (+$8.00)
GB6-672 - 6-rib, 2.60" - 2.80" (+$9.00)


GB8-680 - 8-rib, 2.90" - 3.00" (+$14.00)
GB8-675 - 8-rib, 2.60" - 2.80" (+$11.00)
M90 with 1.91" thick intercooler - G or H-body:


GB6-710 - 6-rib, 2.60" - 2.80" (+$11.00)
M90 with 2.25-2.50" thick intercooler - W-body:


GB6-685 - 6-rib, 2.90" - 3.00" (+$11.00)
GB6-680 - 6-rib, 2.60" - 2.80" (+$8.00)


GB8-685 - 8-rib, 2.90" - 3.00" (+$14.00)
GB8-680 - 8-rib, 2.60" - 2.80" (+$14.00)
M90 with 2.25-2.50" thick intercooler - G or H-body:


GB6-715 - 6-rib, 2.60" - 2.80" (+$18.00)
MP112 with 2.25-2.50" thick intercooler - W-body:


GB6-690 - 6-rib, 3.40 (+11.00)
GB6-685 - 6-rib, 3.00" - 3.20" (+$11.00)
GB8-680 - 8-rib, 2.70" - 2.80" (+$14.00)


--Adam

 

[dole21]

hmm

to run an 8 rib belt, do you have to switch out the other pullies attached to the motor also? are they setup for a six rib or no?

i was just thinking about that....