3800 Lots of Performance mods f/s

[OO SS/GTP]

Sold my car about a week ago and my friend told me to put my parts for sale here.

Used 500 miles: Fully Ported and Polished heads!!!!! $1000 OBO
--------- Flow #'s Better than any other that i have seen done by mike at HIGH FLOW HEADS
* 5 angel valve job
*ported to the very max
*big block retainers
*LS6 Springs


Bolted on never ran with: 1.95 ZZperformance Rockers $200

USED 500 miles: X-P hot cam $150

NEW: Gasket Set (top half) $200

USED 500 miles: MSD boost controtler, MSD Digital Ignition 550
------------------- New was like $850

Scott
[email protected]

Click to read more...

 

[OO SS/GTP]

Also....

00' Black stock Hood good shape 30,000 miles on it
Make offer

Scott
[email protected]

 

[burtgtp1973]

are you the guy who had the blk 2 door for sale on Ebay w/ the SD hood ?

 

[green_e]

I didn't realize that ZZP had released their rockers yet. Are these the Comp Cams version?

 

[OO SS/GTP]

burtgtp1973---- Yes, my car was forsale on ebay

green_e----- I thought i bought these form zzperformance, i could be mistakin (it was like 1 1/2 years ago) all i know is that they are 1.95 rockers

 

[OO SS/GTP]

Make offer need these thing out of house!!!!

Scott

 

[imported_Ron Vogel]

I'd like the rockers, but all I can offer is $150. I have cash, and can pick them up. I'm located in Boilingbrook.

 

[OO SS/GTP]

Rockers are sold to Ron Vogel

Ron, u can have them for $150. Where and when u want to meet.

Scott

 

[Royalgtp]

Originally posted by OO SS/GTP@Sep 9 2004, 07:38 AM
Sold my car about a week ago and my friend told me to put my parts for sale here.

Used 500 miles: Fully Ported and Polished heads!!!!! $1000 OBO
--------- Flow #'s Better than any other that i have seen done by mike at HIGH FLOW HEADS
* 5 angel valve job
*ported to the very max
*big block retainers
*LS6 Springs


Bolted on never ran with: 1.95 ZZperformance Rockers $200

USED 500 miles: X-P hot cam $150

NEW: Gasket Set (top half) $200

USED 500 miles: MSD boost controtler, MSD Digital Ignition 550
------------------- New was like $850

Scott
[email protected]

i may be intrested in these heads...........

Just got a nice paycheck B)


How do these compare to Intenses stage 3 heads?

So can you go with an agressive cam with these heads?

 

[imported_Ron Vogel]

Originally posted by OO SS/GTP@Sep 17 2004, 08:58 AM
Rockers are sold to Ron Vogel

Ron, u can have them for $150. Where and when u want to meet.

Scott

Maybe meet tommorrow morning, I'll get back to you after work. I'd do it tonight, but I may not be able to get out because of family stuff.

 

[Zenger]

Originally posted by RoyalGTP+Sep 17 2004, 09:23 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (RoyalGTP @ Sep 17 2004, 09:23 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-OO SS/GTP@Sep 9 2004, 07:38 AM
Sold my car about a week ago and my friend told me to put my parts for sale here.

Used 500 miles: Fully Ported and Polished heads!!!!! $1000 OBO
--------- Flow #'s Better than any other that i have seen done by mike at HIGH FLOW HEADS
* 5 angel valve job
*ported to the very max
*big block retainers
*LS6 Springs


Bolted on never ran with: 1.95 ZZperformance Rockers $200

USED 500 miles: X-P hot cam $150

NEW: Gasket Set (top half) $200

USED 500 miles: MSD boost controtler, MSD Digital Ignition 550
------------------- New was like $850

Scott
[email protected]

i may be intrested in these heads...........

Just got a nice paycheck B)


How do these compare to Intenses stage 3 heads?

So can you go with an agressive cam with these heads? [/b][/quote]
if those heads are like any of mikers other heads they Out flow Intense big time 15 CFM or more on both sides and 4-7cfm from .100-.400 as well!

 

[Royalgtp]

SO this guy does great head work I assume?

I really, really may be intrested in these........Get a nice little cam to.....

Was the xp cam in with these heads?

WIll I have to do any other work to put a somewhat more agressive cam in there?

I will probley get a stage 2 intense cam or so....


GOT a PIC?????????

 

[OO SS/GTP]

i will get pictueres and flow #s for u.

Royal, whats ur email address??
or email me [email protected]

Scott

 

[Royalgtp]

[email protected]

WHat did you pay for these heads? Just wondering?

What lb springs are on there? 130?

Maybe sometime next week we could meet up.

IM around oak lawn. WHere do you live?

 

[OO SS/GTP]

I live in naperville, I88 and RT59. I payed like $1600 for all the work.
Just let me know and we can meet up!!

Springs are 150-160 lbs

Flow #
Exhaust= +/- 180cfm
Intake= +/-120cfm

Scott

 

[Royalgtp]

Originally posted by OO SS/GTP@Sep 20 2004, 10:57 AM


Springs are 150-160 lbs

Holy crap! WHat did you have on there with the spring type!!!!!??????

 

[OO SS/GTP]

ummm, it would be easyer to list what i didnt have!!

Scott

 

[Royalgtp]

Originally posted by OO SS/GTP@Sep 20 2004, 12:53 PM
ummm, it would be easyer to list what i didnt have!!

Scott

We should try to meet up on THUR night. 6-8 or so.....

I have never heard of a 5 angle valve job?...only 3 and 4......what else did you get done?

btw, im no heads expert.....just really started looking into it the last few.

Would a intense stage 2 cam be a good choice w 130lb springs? Maybe 105LB?

I dont think I want to take the car all the way to intenses stage 3 and 4........

 

[imported_Ron Vogel]

My uncle raced pro mod, they do 7 angle valve jobs! 4-5 angles are what the local shops can do for max performance.

 

[Royalgtp]

Originally posted by OO SS/GTP@Sep 20 2004, 10:57 AM
I live in naperville, I88 and RT59. I payed like $1600 for all the work.
Just let me know and we can meet up!!

Springs are 150-160 lbs

Flow #
Exhaust= +/- 180cfm
Intake= +/-120cfm

Scott

How do yours comare to Intenses? It look like intense outflows yours.
Can you explain your numbers a little better for me? Thanks.
Its just that its a lot of money and im trying to get down to the bottom of this.

From Intense:

From an airflow standpoint, these heads are without question the best 3800 Series II design we have seen:


Intake (28" of water, clay radius to repeat)


.100" - 69 cfm

.200" - 127 cfm

.300" - 175 cfm

.400" - 208 cfm

.500" - 224 cfm

.600" - 235 cfm


Exhaust (28" of water, 1.75" pipe to repeat)


.100" - 60 cfm

.200" - 117 cfm

.300" - 172 cfm

.400" - 199 cfm

.500" - 212 cfm

.600" - 222 cfm

 

[OO SS/GTP]

These #'s were off the top of Mikes head, he said if i need exacts he will dig them up. I dont know much about these heads ill give u his # he will be able to tell u a little more about them. Just tell him u talked to Scott and he will know what u are talking about i let him know u are calling already.

1-708-396-0505 ask for mike
hope that helps

Scott

 

[OO SS/GTP]

Rockers= Sold
Head's= Being looked at today 9/23/04

Make some offers

Scott