3800 Installing front sway bar???

[zeez gtp]

How difficult is this. I took a little look underneath there and it seems pretty tight. I have installed everything else that comes with the gmpp handleing kit. This is the last thing I have to do. I thought I heard somewhere that you have to take out a tie rod or something and that could cause an alignment issue. I just don't want to go under the car and start taking crap apart.

Click to read more...

 

[imported_Diavolo]

I flipped my sway bar and I didn't have any alignment issues. It actually comes out and goes back in pretty easy.

I forget the exact procedure I used. But I think it was just the tie rod, and then the bushings needed to be removed and that was it.

 

[antpearl]

I didn't have to remove anything. Put it in from the passenger side and then just feed it through. It takes some force, but it does go in.

 

[mybluegtp]

but dont you have to flip it if you have headers?

 

[antpearl]

Originally posted by mybluegtp@Sep 3 2004, 02:25 PM
but dont you have to flip it if you have headers?

I dunno...don't have headers...

 

[CoolGTX]

Originally posted by antpearl+Sep 4 2004, 10:52 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (antpearl @ Sep 4 2004, 10:52 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-mybluegtp@Sep 3 2004, 02:25 PM
but dont you have to flip it if you have headers?

I dunno...don't have headers... [/b][/quote]
some do, and some dont, have to flip for headers

 

[imported_Diavolo]

but dont you have to flip it if you have headers?

I did, but I have GMPP sway bars.

 

[mybluegtp]

Originally posted by Diavolo@Sep 5 2004, 09:37 PM

but dont you have to flip it if you have headers?

I did, but I have GMPP sway bars.

well I have RAT swaybars and I think they are thicker then GMPP so I might have to flip it.

 

[Royalgtp]

Flip your sway even if you dont have headers.....that way when you get them you dont have to do it all over again. Thats what I did.


Have 2 people push and pull real hard. It can be a bitch....