Trying to clean up the engine bay and remove EGR and EVAP. EGR is simple, not sure how to do EVAP the right way. Purge solenoid has 2 vacuum ports, 1 goes to the TB other goes all the way back to the EVAP canister. I'll be installing Northstar TB so the vacuum source will be eliminated as I don't have the vacuum fitting on the TB adapter. What to do about the line that goes back to the canister? Do I plug it or just leave it? Had it done on my '04 and if memory serves me right I saw it just moved on the side with the electrical connector but can't tell for sure is it was plugged or not.
Thanks.
Thanks.