I'm having issues still with my trans shifting too early... so I sat down w/some paper and figured out the formula I need to determine # RPM it takes to go 1MPH in a particular gear...
(
TRANS_RATIO(REAR_GEAR_RATIO((5280(1/60))/TIRE_CIRCUMFERENCE))=RPM for those interested)
so... I'm bored ...
http://www.horist.com/MPHCalc/MPHCalc.asp
(Tire width is the first part fyour tire... IE 275/50/15 275 is width, 50 is aspect ratio, 15 is wheel diameter)
For Gear ratios... i don't know what GPs are but my F-Body is 3.06 1.62 1.00 0.70 (with 5th and 6th for manul cars)
Rear gear ratio can be the transaxle ratio
(
TRANS_RATIO(REAR_GEAR_RATIO((5280(1/60))/TIRE_CIRCUMFERENCE))=RPM for those interested)
so... I'm bored ...
http://www.horist.com/MPHCalc/MPHCalc.asp
(Tire width is the first part fyour tire... IE 275/50/15 275 is width, 50 is aspect ratio, 15 is wheel diameter)
For Gear ratios... i don't know what GPs are but my F-Body is 3.06 1.62 1.00 0.70 (with 5th and 6th for manul cars)
Rear gear ratio can be the transaxle ratio