follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
If you're going through the trouble of replacing your heads you might as well get some that are ported/polished. If you can't source a set I've got a set off my '98 that are in good shape. They haven't been ported/polished but do have 105lb springs, vitron seals and LS1 retainers...basically set up for a high lift cam. The after market parts have roughly 12k miles on them. PM me if you're interested.Originally posted by J.E.T.@Apr 4 2004, 02:45 PM
Looking for stock or better heads. If I'm going to pull my heads out, I might as well replace them just in case.
Please email me or post. I need these right away.
J.E.T.
'97 Red GTP
what about a mild port and polish job?Originally posted by rob@Apr 5 2004, 10:44 AM
No offense to any replys.....I can get yours done for around $200....Thats cooked, fluxed, valve job, deck/plained, and new seals....They will also check your valve guides....A day or day in a half turn around..