3800 FLP Dyno day -- March 27th

[horist]

The MFBA (Midwest F-Body Association) is having a Dyno day at FinishLine Performance in Naperville on Saturday the 27th.

I've talked it over w/the moderators of the MFBA and they would have no problems having some GPs showing up to hang out and dyno (if you want to)

If you're interested in showing please register and post in the following thread:

http://forum.fbody.us/showthread.php?p=203045#post203045



FLP will be providing food and drinks (soda only ) for all that attend free of charge

Date: Saturday, March 27th
Time: Start at 9am and go until we finish
Cost: $65 for two pulls (includes air/fuel, torque, and HP)
Location: 10 South 059 Schoger Road Unit # 50
Naperville, IL 60564



We can have up to 30 cars on the list.

Click to read more...

 

[rob]

Hmmmmm hope I have my MP112 and Map IC back and installed by then...I just got my block and stuff back today...Fresh hone and cam bearings and wrist pin bushings. I guess I could run my M90 and 2.8". Then run the MP112 at Rons dyno day to see how much more power im getting from the SC and IC combo.

 

[gtphale]

After reading that map ic thread you didn't return that thing???? I think you should see if Mike will take it back and exchange for a working IC.

 

[staceyyearsich]

Is anyone from the club going to this?

 

[Jamie231]

I will be there if i get my trans done....

 

[jmdz06]

if i can get in contact with charles beyer and he can tune my car, i'll already be near there so i'll watch at the very least.

 

[jmdz06]

ok, i WILL be there along with another GPer from here in champaign. i may be meeting up with someone else in aurora (BigJermGTP on gp-owners). he may or may not actually dyno.

anyone else that was even thinking about it, JOIN US!

oh, and TTT!

 

[horist]

cool, if you and your friend want to dyno be sure to post in that thread ... though it's a go no matter what and we are only at like 20 or 22 cars... max is 30 so should be plenty of room

I'll be there spectating but didn't get the nitrous kit hooked up in time so won't be dynoing yet

 

[horist]

doh n/m just saw you already posted cya saturday ... i'll be in my TA

 

[sweetness]

you know, if you have time tomorrow (thursday) i could help you install that nitrous kit if you wanted to try and get it done before saturday... let me know if you want to give it a try.

BC

 

[horist]

Thanks for the offer But I don't think I'll have time... The main control box is done

http://www.horist.com/images/NitrousControlBox/DSC00047.JPG

(basically just the RPM switch, 2 relays setup for ground activation and all the leads... should make it much cleaner in the glove box...)

But by the time I get out of work it's dark out... plus I'd still have to get the bottle filled. I may just bring the stuff I need w/me to FLP and do it while i'm there... not sure

but regardless thanks for the offer

 

[staceyyearsich]

So who's all going to spectate or run there car?? I was gunna spectate with Leo but he can't go now...

 

[jmdz06]

horist, when are you gonig to show up?

 

[horist]

well... i'm not an early bird and Naperville's a good hall from me (coming from Wauconda) so I figure I'll show up around 11:00 or so.. 11:30 at the latest

 

[LPSPEED2]

I might show up, no dyno though, but i might come watch with a buddy if that alright.

 

[horist]

that'd be fine the more the marrier

 

[CoolGTX]

will you all be around after 4pm, i need a dyno bad.

 

[horist]

probably not it usually gets done between 2 and 3 and once all the cars are done it wraps up pretty quickly (saturdays are normally a day off for FLP so when they have a dyno day they have to come in on their day off... so they don't stick around much longer than it takes to get the dynos done)

 

[CoolGTX]

all righty, thanks

looks like ill be at us41 sunday then, hopw to see you there

 

[horist]

http://www.mapquest.com/maps/map.adp?count...&submit=Get+Map

There's the map for FLP

to lookup using other services... use the address as 10S059 Schoger Road Naperville Illinois

It's basically just a couple miles west of Rt. 59