This car is built with no expense spared. It has the best of what can be bought for this gen and has been babied beyond explanation. This car has NEVER seen rain and has always been covered in the garage. What you see in the pictures is in its current set up. I have all the parts to put this car back to stock. Engine, Suspension, Brakes, Exhaust (all in one piece)- took down the diff to get it out of the car, wheels, and tires. The differential, trans cross member, k-member, and all suspension components have been taken off and professionally painted.
Here are the details of the car:
2002 35th Anniversary Camaro SS
Exterior/ interior all original
8200 original miles
Parts installed at 5000 miles
-SLP ZL402 crate engine
-6 speed manual (modified by Finishline)
-Tick performance clutch master cylinder
-LS9 Twin disc clutch assy
-Aluminum driveshaft
-Moser 12 bolt rear axle assy w/ 4:10 gears
-SLP long tube headers w/ high flow cats
-SLP cat back exhaust with dual tip outlets
-SLP Cold air intake
-Fast 102mm intake & throttle body
-Fast fuel rails
-C5 Z06 Chrome wheels 17x9 front 18x9.5 rear
-Nitto NT05 275 40/17 front; NT05 285 40/18 rear
-SSBC 4 piston caliper brakes w/ slotted rotors front; slotted rotors rear
-Spohn performance torque arm
-Hotckis rear panhard bar & rear control arms, Strut tower brace
-SLP Subframe connectors
-Bilstein shocks/ struts
I will post a video of the car shortly.
$29,800 obo.
https://vimeo.com/160190328
Here are the details of the car:
2002 35th Anniversary Camaro SS
Exterior/ interior all original
8200 original miles
Parts installed at 5000 miles
-SLP ZL402 crate engine
-6 speed manual (modified by Finishline)
-Tick performance clutch master cylinder
-LS9 Twin disc clutch assy
-Aluminum driveshaft
-Moser 12 bolt rear axle assy w/ 4:10 gears
-SLP long tube headers w/ high flow cats
-SLP cat back exhaust with dual tip outlets
-SLP Cold air intake
-Fast 102mm intake & throttle body
-Fast fuel rails
-C5 Z06 Chrome wheels 17x9 front 18x9.5 rear
-Nitto NT05 275 40/17 front; NT05 285 40/18 rear
-SSBC 4 piston caliper brakes w/ slotted rotors front; slotted rotors rear
-Spohn performance torque arm
-Hotckis rear panhard bar & rear control arms, Strut tower brace
-SLP Subframe connectors
-Bilstein shocks/ struts
I will post a video of the car shortly.
$29,800 obo.
https://vimeo.com/160190328
Attachments
Last edited:
)
