Another project I've been working on is making my own heater lines for the LS swap. I pieced together some dorman connectors and rubber hose last winter, and go figure it started to leak this winter!
Purchased a tubing bender, and 6ft of aluminum piping in 5/8" and 3/4" OD. Also picked up the tools for rolling a bead from EARL. They work pretty well I think
Going to get some either electrical like split loom covering for the tubes, or foam type so it doesn't stick as much. Also might pull back the bend at the firewall so the pipe sits at a flush 90deg at the back
Purchased a tubing bender, and 6ft of aluminum piping in 5/8" and 3/4" OD. Also picked up the tools for rolling a bead from EARL. They work pretty well I think
Going to get some either electrical like split loom covering for the tubes, or foam type so it doesn't stick as much. Also might pull back the bend at the firewall so the pipe sits at a flush 90deg at the back