Open Positions- CNC Operators, Setup, & Programming

Bigturbonotch

WAIT AND SEE
TCG Premium
Jan 26, 2005
35,814
3,352
My shop in St Charles, IL is looking for various positions. We are a aerospace manufacture with focus on 5 axis machining. We use DMG MORI machines as well as Haas and others. We are looking for shop hands, cnc operators, setup operator, and programmer. Pay is based on skill and experience. We offer Health/Dental and 401k. Descriptions of jobs below and any questions feel free to ask.

Shop Hand- You will be doing general labor work around the shop which includes, but is not excluded to: cleaning around the shop, cleaning parts, deburring parts, and other various tasks.

CNC Operator- General knowledge of machining and how CNC machines work is required. You will be operating a machine(s), changing parts, deburring parts off the machine, and quality control of finished parts.

CNC Setup Operator- Specific knowledge of Siemans 840D control is required. Familiarity of DMG MORI machines is a huge plus. You will be verifying and setting up the machine for production of parts. You may be required to make fixtures, choose tooling, and edit machine program among other things.

Programmer- Knowledge of CAD/CAM with five axis machining is required. We use HSM works, Powermill, Fusion 360, and Hypermill.
 

Bigturbonotch

WAIT AND SEE
TCG Premium
Jan 26, 2005
35,814
3,352
We are still looking for help.....primarily operators and shop hand.
 

Attachments

  • DMG MORI MACHINES.jpg
    DMG MORI MACHINES.jpg
    140 KB · Views: 322
  • DMG DMU 125P.jpg
    DMG DMU 125P.jpg
    134.3 KB · Views: 318
  • DMG MORI DMF 260.jpg
    DMG MORI DMF 260.jpg
    94.2 KB · Views: 322

Bigturbonotch

WAIT AND SEE
TCG Premium
Jan 26, 2005
35,814
3,352
We are still looking for help primarily CNC operators, assembly department, Shipping/receiving, and quality personnel. Pay is dependent upon experience but we are open to discussion once we get a feel for the person applying.

We just moved to Aurora right off 88 and Eola and are in a state of art 35,000 sqft building.

Here is our website if you or someone you know may be interested in a position above or any manufacturing position.

Direct AeroSystems – Direct AeroSystems is a small business supplier of hardware and parts kits to the Aerospace and Defense Industry.
 

Bigturbonotch

WAIT AND SEE
TCG Premium
Jan 26, 2005
35,814
3,352
Good question,

There's a difference between programmers and setup guys who make blocks with holes with them brackets, or simple mold stuff (easy 3 axis stuff) and a difference with running and programming 5 axis parts that take days and hours to machine. We do both.

CNC Mill Operator which would include but not be limited to changing parts at machine, deburring, cleaning area. No programming or setup experience required. This is an ENTRY level position with potential to grow to setup or even learn simple programing. Starting pay would be $16-$17 an hour with over time every week and heath/dental.

Other positions are subject to skill set and I would be more than happy to discuss over phone or PM and not looking to waste anyone's time so we will test skills at interview.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info