đź‘‹ INTRO New guy from the South Burbs

Five-0

TCG Elite Member
TCG Sponsor
Oct 5, 2015
1,026
3,248


Current Mods:

Exterior:

*2011 blind spot mirrors
*shorty antennae
*sequential tail lights
*smoked front turn signals
*Roush Hyperblack 20x9.5" wheels

Interior:

*TWM weighted shift knob

Engine:

*Stock intake with Steeda CMDP
*Ford Racing 62mm Throttle Body
*Siemens 42 Lb. injectors
*DeatschWerks 340 LPH fuel pump
*D-1SC Procharger Stage II with 4.63 pulley and stubby filter
*Tuned by Larry at ASSC Racing

Drive-train:

*MGW short shifter
*McLeod RST twin-disc clutch and lightened steel flywheel
*JPC braided clutch line
*Exedy TOB
*Syncromesh trans fluid

Suspension:

*BMR K-member with poly mounts
*BMR Radiator Support

Exhaust:

*BBK cermaic coated long tubes
*BBK Catted X-pipe
*Corsa Sport Axleback



Parts I have and need to install this winter

BMR upper control arm and mount
BMR lower control arms
BMR panhard bar and support
Tokico D-spec shocks/struts with BMR lowering springs
15" Brembo front brakes, 14" rear discs
Aeroforce wideband and Autometer Cobalt boost gauge
 

Five-0

TCG Elite Member
TCG Sponsor
Oct 5, 2015
1,026
3,248
Car made 496/431 with the donks on it. Not too shabby.

I've owned the car for just shy of 5 years, finally did all the work to it this summer.

I like drag racing, but I built this car just to be a fun cruiser. More show with some go if you will.
 

Smokinhot

3-man rules!!!!
Jul 4, 2007
14,060
1,836
Lansing, IL
Real Name
IM me if you wanna know more ;)
Welcome! What's the mod list look like on that thing?

into racing or anything?
Ha, we'll that escalated quickly!


Current Mods:

Exterior:

*2011 blind spot mirrors
*shorty antennae
*sequential tail lights
*smoked front turn signals
*Roush Hyperblack 20x9.5" wheels

Interior:

*TWM weighted shift knob

Engine:

*Stock intake with Steeda CMDP
*Ford Racing 62mm Throttle Body
*Siemens 42 Lb. injectors
*DeatschWerks 340 LPH fuel pump
*D-1SC Procharger Stage II with 4.63 pulley and stubby filter
*Tuned by Larry at ASSC Racing

Drive-train:

*MGW short shifter
*McLeod RST twin-disc clutch and lightened steel flywheel
*JPC braided clutch line
*Exedy TOB
*Syncromesh trans fluid

Suspension:

*BMR K-member with poly mounts
*BMR Radiator Support

Exhaust:

*BBK cermaic coated long tubes
*BBK Catted X-pipe
*Corsa Sport Axleback



Parts I have and need to install this winter

BMR upper control arm and mount
BMR lower control arms
BMR panhard bar and support
Tokico D-spec shocks/struts with BMR lowering springs
15" Brembo front brakes, 14" rear discs
Aeroforce wideband and Autometer Cobalt boost gauge
Welcome, nice ride
 

jason05gt

TCG Elite Member
Jan 17, 2007
15,307
7,195
Naperville
Car made 496/431 with the donks on it. Not too shabby.

I've owned the car for just shy of 5 years, finally did all the work to it this summer.

I like drag racing, but I built this car just to be a fun cruiser. More show with some go if you will.



Nice numbers. My Vortech 3V put down almost the exact same numbers last time it was on the dyno.
 

Five-0

TCG Elite Member
TCG Sponsor
Oct 5, 2015
1,026
3,248
Thanks everyone for the warm welcome! :toast:

Dat procharger :pedobear:

Welcome to the group. Dat D1SC doe :-E

Procharger fo life!:bario:

welcome...where at in Southsubs?

The hood known as Homer Glen

Welcome! 3v represent! I used to get my nitrous from Larry when I still lived in IL. That's quite the haul north if you live on the south side.

It was a cruise, but I had it set in my mind he was tuning it before I moved south. Made for a fun drive back at least!
 

Thread Info