Can Sutton help me??

[Brutal04]

Can Sutton tune my car?

I'm dumping GOBS!! of fuel in the motor with the 42#ers..

Heres my set up:

- Anderson Motorsports, Split Ported Cobra intake (Upper & Lower)
- Edel. 75mm throttle body
- C&L 80mm MAF (cal. 42#)
- Ford 42lb Injectors
- Areomotive Fuel Pressure Regulator
- Trick Flow Track Heat Camshaft
- E7TE Power Heads (getting Trick Flow R's)
- Vortech V1 S-Trim (w/Bypass Valve)
- 10 rib 2.50" Blower Pulley
- No Smog / No Cats
- BBK Shorties, Off Road X-Pipe, Am. Thunder Cat-Back
- 255 In Tank pump
- Stock block
- Stock Computer (NO Chip)

Over on Corral.. They seem to think all i need is a tune.. ???

Click to read more...

 

[Randy@SuttonHp]

Can Sutton tune my car?

I'm dumping GOBS!! of fuel in the motor with the 42#ers..

Heres my set up:

- Anderson Motorsports, Split Ported Cobra intake (Upper & Lower)
- Edel. 75mm throttle body
- C&L 80mm MAF (cal. 42#)
- Ford 42lb Injectors
- Areomotive Fuel Pressure Regulator
- Trick Flow Track Heat Camshaft
- E7TE Power Heads (getting Trick Flow R's)
- Vortech V1 S-Trim (w/Bypass Valve)
- 10 rib 2.50" Blower Pulley
- No Smog / No Cats
- BBK Shorties, Off Road X-Pipe, Am. Thunder Cat-Back
- 255 In Tank pump
- Stock block
- Stock Computer (NO Chip)

Over on Corral.. They seem to think all i need is a tune.. ???

Give us a call we can fix it up.
What year and model.

 

[Brutal04]

Give us a call we can fix it up.
What year and model.

It's a '93 5.0 LX..

I just installed:

- Edel. 75mm throttle body (It was a 70mm)
- C&L 80mm MAF (cal. 42#) (It was a 73mm)
- Ford 42lb Injectors (They were 19#)
- Areomotive Fuel Pressure Regulator (Swapped the Kirban)
- Vortech Bypass Valve (Didn't have one)
- 10 rib 2.50" Blower Pulley (Had a 6 rib 3.33)

I have to get it running so I can get it to you.. I was going to try to set the fuel at 34 & time it at 10 deg.. That should be safe to drive it to you..

 

[whistlen93]

10 rib 2.50" Blower Pulley v1 s trim maxxes out at 50000rpm. if your crank pulley is a 6.87 a 2.95 pulley is at around 49k @6000 rpm..........

 

[Cobra Dude]

SuttonHP now has a lot of experience in cleaning up the other guys mess. I am not going to call out any of the names of these shops but I have seen some of these cars and talked to the owners. After SuttonHP took the time (it takes time to clean up behind someone else) to resolve their problems, they were very happy. I am happy too because I referred them to SuttonHP and I have to face these guys when they get their cars out of the shop. Keep up the good work SuttonHP.

 

[1badass96gt]

SuttonHP now has a lot of experience in cleaning up the other guys mess. I am not going to call out any of the names of these shops but I have seen some of these cars and talked to the owners.

I definitely saw some of those while I was there. I saw Jerry fix tunes that came from several different nationally recoginized shops. In Jerry's words and the moto of Sutton, he'll unleash the beast in that car.