Pulled from another site. Hes expecting to make just over 400rwhp.
Step 1: Remove front bumper
Step 2: Swap shitty stock radiator
Step 3: Gently rub a 10mm socket clockwise on your factory serpentine belt
Step 4: Use stock radiator drain petcock to tighten a hose clamp onto your bare throttle body...mmm
Step 5: Install crankshaft pulley bolt into throttle body
Step 6: Locate oil filter and TOUCH GENTLY using your right index finger
Step 7: Install mmmmdada intercooler
mmmmmmmm
Step 8: Once intercooler is installed, you can now remove the crankshaft pulley bolt and install it into your upper radiator hose. Torque to 75 ft-lbs
Step 9: Install factory fuel pump under the driver side headlight to aid the aftermarket pump
Step 10: Locate blower and caress it gently
Also do some weird shit with it
[y]SgpAR9tQ6dA[/y]
Step 11: Mmmmmmmm
Step 12: Install alternator induction system
Step 13: Torque driver side lug nuts to AT LEAST 250 ft-lbs
Step 14: Enjoy your Kraftwerks blower
And a quick video
https://www.youtube.com/watch?v=4hdsfRfWH6k
Step 1: Remove front bumper
Step 2: Swap shitty stock radiator
Step 3: Gently rub a 10mm socket clockwise on your factory serpentine belt
Step 4: Use stock radiator drain petcock to tighten a hose clamp onto your bare throttle body...mmm
Step 5: Install crankshaft pulley bolt into throttle body
Step 6: Locate oil filter and TOUCH GENTLY using your right index finger
Step 7: Install mmmmdada intercooler
mmmmmmmm
Step 8: Once intercooler is installed, you can now remove the crankshaft pulley bolt and install it into your upper radiator hose. Torque to 75 ft-lbs
Step 9: Install factory fuel pump under the driver side headlight to aid the aftermarket pump
Step 10: Locate blower and caress it gently
Also do some weird shit with it
[y]SgpAR9tQ6dA[/y]
Step 11: Mmmmmmmm
Step 12: Install alternator induction system
Step 13: Torque driver side lug nuts to AT LEAST 250 ft-lbs
Step 14: Enjoy your Kraftwerks blower
And a quick video
https://www.youtube.com/watch?v=4hdsfRfWH6k