3/4" pre bent 90* fuel line locally?

[crooks]

Does anyone know where I can find 3/4" pre bent 90* elbow 3/4" rubber fuel line locally? Total length is like 5.5"
This is for a vent tube off the tank. I have tried straight tube and it kinks to much. I know I can order it for $30 plus shipping but want to find something local first.

Click to read more...

 

[DynaSlim]

Granger? Fastnal?

 

[crooks]

Don't see any on either website. I need rubber line not hard line.

 

[RICH17]

You'll have to order to your specification

 

[wolfe]

Winners Circle?

 

[daturbosix]

feel comfortable using heater hose?

 

[DynaSlim]

I did a quick search but wasn't able to find any but maybe if you called they might???
Products - Parker

 

[Turbocharged400sbc]

there's a nearly 180" universal hose youll find swinging on the rack that's 3/4" id

or its 5/8ths...

go behind the counter.

that's how I found that an 89 Isuzu radiator hose works perfect to connect a buick v6 to a mustang radiator....

 

[willizm]

Winners Circle?

This! You'd be surprised by how much shit they have in stock. half of the fittings and odds/ends on my car were from there.

 

[Turbocharged400sbc]

Joliet?

eeeww

 

[willizm]

Joliet?

eeeww

You'd fit right in

 

[crooks]

Heater hose also kinked.

 

[Turbocharged400sbc]

Heater hose also kinked.

we are referring to the molded heater hoses, of the 3/4" variety that you can buy for 11$, and cut out the 90* bend you need

 

[crooks]

And I can get that at Napa?

 

[DynaSlim]

Most heater hose can chemically handle gasolene, however the problem may be if it can handle slight negative pressure or partial vacuum in the tank without collapse which would cut off any venting flow.

 

[daturbosix]

And I can get that at Napa?

should be able to, but i would try a vatozone or advance, somewhere where you can easily go in the back with them to physically view their selection and make a choice. because you can just walk in and say i need a hose for ____________ and get it, you need to see whats small and cheap but contains a 90 degree molded bend.

 

[daturbosix]

Hoses | Air, Fuel & Miscellanous Hoses | Gates® Heater Hose - 90 Molded - 3/4" X 4" X 6" 28474 | B912158 - GlobalIndustrial.com

maybe something like that?

 

[Turbocharged400sbc]

Fife finds a way....

 

[crooks]

Hoses | Air, Fuel & Miscellanous Hoses | Gates® Heater Hose - 90 Molded - 3/4" X 4" X 6" 28474 | B912158 - GlobalIndustrial.com

maybe something like that?

Yes that cut down would work.

 

[daturbosix]

Yes that cut down would work.

start calling around and ask to cross reference that gates part number

 

[daturbosix]

FOUND IT!

napa p/n 9815

NAPA AUTO PARTS

instock at my store, for $9.86

 

[Turbocharged400sbc]

im going to call all the stores around you and reserve those hoses so it doesn't show in their system so your forced to go behind the counter and look at lots of ho's

 

[crooks]

Thanks. I will get this on tomorrow and see if this turd can do a burnout. Its got no traction control so I got a shot

 

[daturbosix]

Thanks. I will get this on tomorrow and see if this turd can do a burnout. Its got no traction control so I got a shot

Yea don't forget to turn it off heheheh

 

[Turbocharged400sbc]

btw im trying to imagine a fuel tank vent that would be 3/4" in diameter...are you measuring the OD of the hose?
hose is identified by the ID or inner diameter. where a 3/4OD hose may well be a 3/8ths ID hose size.

I think the bent hose on a dodge diesel tank is only 1/2" ID....

figured id double check.....