car craigslist finds

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
06 Jeep Hennessey SRT600 - $34000 (Dallas)


00W0W_hWJWDyV9Gge_600x450.jpg

06 Jeep Cherokee Hennessey SRT600 Turbocharged AWD with 20,600 miles..yes that is correct.I purchased with 15,000 miles on it back in 2011.Very fast and rare.I don't really want to sell it but I'm trying pursue other things.

Few Things I have added since I purchased
New Level Ten Performance Transmission(can handle 1000 hp and tq)
New B&M Transmission Cooler
New Paramount transfer case(can handle 1000hp and tq)
New Precision 6765 Turbo
Eboost2 Controller
80lb 840cc injectors

Email for more info..


Serious inquiries email only!!!
.
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
this is cool as shit.

Fast V8 Swapped RX7 - $4000 (Milwaukee)


00000_b2E7HKsFLmL_600x450.jpg

Who will be the next person to own this beast?

This is a 1985 Mazda RX7 GSL
Newer paint.
Aluminum racing seats.
All lights & signals work.
Carbureted 302 ford, shorty headers, built C4 trans w 2400 stall & manual valve body.
Clutch pedal is there, so it would not be that hard to throw in a T5 trans.
Wet 75 shot, MT drag radials with minimal miles on them in the rear and skinnys up front.
Also different rims with street tires on them for cruising and laying rubber, pictures below.
Car runs 12's on motor and 11's on spray per last owner, I have never taken it to the strip.
New suspension all around.
Actually handles and cruises well around town, the 5 liter is only 50 or so lbs heavier than the stock Wankel so the car still hugs the road.
It sounds wonderful and goes like a bat out of hell.
I get people coming up to me at the gas station all the time.
I really don't want to sell it but I could use the money to put towards another project right now, and I just do not have time to ever get to the strip.
I recently went on about a 60 mile trip, in 80 degree heat, and it stayed nice and cool and ran like a dream.
I do drive it all over on the weekends, and it always gets lots of looks and odd comments.
A guy at Ace Hardware once yelled at me " That don't sound like no turbine engine in there", to which I responded, "No sir, it is not."

If you want more info, text or call.
Looking to get 4,200 for it, open to an offer.
May take trade for???
262-2seven1-54one7
  • Location: Milwaukee
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
94 mazda protege 11's sec - $4500 (chicago)


00a0a_heMRIamGBHs_600x450.jpg

94 MAZDA PROTEGE PROMISE YOU WONT FIND ANOTHER ONE LIKE THIS. THE BODY IS REAL CLEAN HAS BEEN PAINTER FLAT OLIVE DRAB ALL THE DOOR JAMS AND DRUNK. ENGINE BAY IS PAINTED FLAT BLACK. THE CAR IS SETUP FOR STREET/STRIP I DRIVE IT EVERYDAY TO WORK. THE CAR IS TUNE ON E85 WITH MEGASQUIRT. RUNS THE 1/4 MILE AT 11.46 @119 ON A SAFE TUNE ON 10 PSI. THE CAR HAS RUN THE BEST OF 11.08 @125 AT 14 PSI.

MOD LIST

ENGINE /DRIVETRAIN

KLDE SWAP WITH 98000 MILES, FULLY LOADED MEGASQUIRT 2.5, 626 REBUILT TRANS WITH MFACTORY LSD, 4:10 FINAL DRIVE CLUTCH MASTER STAGE 4 CLUTCH, ALL NEW GASKET, WATER PUMP, TIMING BELT, AEROMOTIVE REGULATOR 1:1, WALBRO 400 PUMP, T 66 TURBO, 2.5 "DOWNPIPE (DUMPS ON LEFT SIDE OF FRONT TIRE) AUTOMETER GAUGES:TACH, BOOST/VAC, AND TEMP, AEM UEGO WIDEBAND,

SUSPENSION,WHEELS

KYB STRUTS WITH COILOVER SLEEVES ON DROPZONE SPRINGS, WHEELS ARE V2 DRAGS FRONT 13X8 WITH M&H 24.5X8.5X13 SLICKS ALWAYS CUT 1.6 TO 1.7 60FT. REAR ARE 15X3 WITH M&H FRONT RUNNERS

INTERIOR

6 POINT ROLL CAGE WITH 5 POINT HARNESS.
:wtf: :rofl: :fy:
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
2001 Cobra 1400 HP/ Street Legal - $50000 (chicago)


00x0x_bVOLkzGYKyi_600x450.jpg

2001 Cobra with stock suspension / street legal. Motor capable of up to 1400 hp. This is a build that went out of control. Have over $42000.00 in parts receipts.

One owner southern car with 5300 original miles. Everything works, power windows, power trunk, lights, turn signals etc. Remove the intercooler and install another seat and you will have a badazz street car.

Fresh 4.6 Aluminum Teksid engine w/Manley pro series I beam rods, Diamond pistons, Kellogg crank, new Fr 500 heads - ported & flowed, 1mm oversized stainless valves, Crower cams and springs, adjustable cam pulleys, Hogan sheet metal intake with nitrous bungs, 90mm Accufab throttle body, Kook headers and stainless exhaust, F2M ProCharger with cog belt, ProCharger air/water cooler, 10 gal. intercooler water tank with Riechard big fill lid, MSD front drive distributer, MSD 7al 2 ignition, Weldon 2035 fuel pump with controller, Weldon regulator and filter, 160lbs. injectors, Fast engine management with data logger, Miziere water pump, Star vacuum pump, ATI damper, custom aluminum radiator with shroud, 5 gallon fuel cell.

UPR pro series adj. upper and lower control arms, UPR anti roll bar, Koni rear coil overs, Mosher 33 spline axles with c-clip eliminators, Strange - 5/8 studs, Mosher spool, UPR front coil over with Lakewood struts, Flaming River rack and steering shaft, manual brake conversion, Fresh C-4 with Vasco input shaft, 6 pinion planetary, reverse manual valve with Pro brake, cooler, Ultra Bell housing, JW flex plate, Coan converter.

M/T wheels and tires, 6" extended cowl hood, 10 pt. cage - NHRA certified, Kirkey seat, Autometer gauges.

Possible trade for Nostalgia car, but must be a nice piece.

Please don't waste my time, I won't waste yours.
.
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
this has potential to be fucking awesome... 928 with an ls1... :wackit:


Chevy hot rod - 1980 928 Porsche - $10500 (Northwest suburbs near Arlington Race Tr)

+-

Leaflet | Map data © OpenStreetMap



Rand rd. at Quintin rd.

1980 Porsche 928 'Euro' (smaller, lighter than standard 928) with a dependable Chevy LS1 Corvette motor. Fuel injected with a 3/4 cam. Auto transmission. 18 inch Carrera wheels with new tires and rear shocks. Everything under the hood is GM, power steering, ac compressor, alternator engine management computer, etc. Has a start button installed in the center console with bluetooth. Solid rust free Nevada car with the majority of work completed in the the last year. Not a show car, paint is a ten footer but looks good. Interior is presentable, dash has a cover due to sun exposure. Car has been inspected and is a solid driver. Drives and stops straight. This a fast car not recommended for young drivers. Call for more details.

847 363 1445
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
:wtf: look where the shifter is :rofl:


23 ROADSTER ROD (INDIANA)


00X0X_7kQQuKzGx58_600x450.jpg

23 BANTAM ROADSTER BODIED DRAGSTER ONE OF A KIND, EVERTHING DONE RIGHT,IRON DUKE 4 CYL MOTOR ALL REDONE WAS TOLD PUTTING OUT 270 HP AND RAN SUB 11s,CAR WEIGHT IS 1100#,2SP POWERGLYDE TRANS,9 IN FORD REAREND,BATTERY CUT OF SWITCH,FULL HARNESS AND ROLL CAGE TIRES ARE LIKE NEW,ALSO SET OF NICE DRAG SLICKS ON SAME RIMS,HAVE COOL OLD BIG HEAD LIGHTS AND TAIL LIGHTS,4 BARREL ALUMINUM INTAKE,THIS THING IS SCARY FAST, JUST LOOKING TO SEE WHATS OUT THERE LIKE MUSTANGS 66-70 NO 6 CYL NO JUNK LOTS OF TIME AN MONEY IN CAR 260-318-1177
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
1990 Mustang LX "Beater Bomb" (Omaha, Ne)


00t0t_4ZqcEwHe0f9_600x450.jpg

Finally time to move on with this car, it has come a long way since i owned it.

TX2K13 STREETS '13 - StangKilr vs Beater Bomb & More - YouTube

THE BEATER BOMB vs Everyone and their Mom! - YouTube

"Beater Bomb" goes to the 1/4 mile - YouTube

BEATER BOMB 5.3L 500hp Fox vs R1 vs ZX10R vs GSXR600 & More - YouTube

Plenty of videos showing the car run.


Started out at a 4 cylinder daily driver. It now has a iron block 347 Ls based engine.

3.905 bore. stock 5.3 stroke.
CP forged flat top pistons.
Scat forged H beam rods
Stock 5.3 crank
MS3 cam 237/242, .603"/.609", 112 LSA
PRC springs
CTS-V lifters
hardened pushrods

Power adders:
NOS direct port system Jetted for a 250 shot.
Nitrous works Plate kit. jetted for a 100 shot.
Standalone nitrous fuel system and pump with c16.
NOS mini 2 stage progressive nitrous controller.
2 20lb nitrous bottles and bottle heater
It has a custom bottle bracket setup in the trunk.

The heads are 243 casting head ported and polished flowing 300+
With REV hardened valves 2.02/1.59
They have been decked .060.

It has an Edelbrock Vic Jr intake with a Holley 750 double pumper carb converted to E85.

MSD 6010 digital box plug and play to the cam and crank sensor that controls the timing and factory coils.

Tranny is a TH350 with 3200 stall.
custom drive shaft
8.8 rear end with 3.27 gears.

Suspension:
AJE k member
front coil overs with 90/10 lakewoods
Rear strange 10 way adjustables
Eibach drag springs
adjustable control arms
8pt Chromoly cage
Subframe connectors


The car still has a complete interior in it.


On motor it has made a best of 380whp on a mustang dyno in omaha. Approx 500 motor HP
On a 250 shot it made a best of 647whp in KC.

The car weighs 3085 with me in it after the cage.

At that power level, on one kit. the car has been a best of 9.57 @ 146mph in the 1/4 mile. And a best of 6.11 @ 116 in the 1/8th mile.

On motor this setup went 11.1 @ 124 and 7.1 @ 98.

Very possible to go low 9s on both nitrous kits.


I have moved the price to 11,500 obo. I will entertain trades of other mustangs, any combos. I would prefer another LS mustang.

I can also swap in a stock 5.3 if desired to lower the price.

Contact me either at [email protected] or 402-659-nine7six0

Thanks,

Joey.
.
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
9 second El Camino - $10000 (Lawrence, MI)


00K0K_iQK8sfXk96g_600x450.jpg

It has a brand new 468BBC roller motor 14:1 compression. It has 400 reverse valve body trans with 5500 stall. It is tubbed. It runs, drives and looks great! Needs nothing, never no rust or body filler in the car! It will run 9.20's in the 1/4 mile. Too much to list on this car, if you want more info call me. If you want more pics, I would have to email them to you. I am asking $10,000 or best offer.. Trades will be considered. (269)369-6424 or 269- 539-4022. Thanks for looking.
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
this is sick butnot 150k sick.


STREET LEGAL INDYCAR 600 HP NO ONE HAS THIS! INCREDIBLE ONE OF A KIND - $150000 (Wisconsin)


01515_aqQrA2glgml_600x450.jpg

Description
UNREAL labor of love one off street legal IndyCar. Under 2000 pounds 600+ hp new 423 SBC INCREDIBLE attention to detail and AMAZING to drive anytime. UNREAL handling and acceleration and believe it or not comfort. MANY MANY unique and custom awesome features +++ Built in 2004 and just now (2013) brand new 423 ci DART SHP AFR HEAD FULLY FORGED HYDRAULIC ROLLER MOTOR and new wheels and tires. Car makes Lambos and Ferraris and ANYTHING look tame. This IS a TRUE EXOTIC and then some make no mistake! NO ONE ELSE HAS THIS PERIOD and the attention to detail is amazing. Polished everything and rear view camera w remote OR use the custom glass windshield w wiper. Data Aquisition built into digital dash w full gauges etc... Parking brake/horn/LED blinkers and driving lights and headlights w removable fenders license plate light, emergency flashers, putting in fire system soon too.

History

Driven just 1869 miles TOTAL since built and never raced. (STREET MILES and a couple of drags) JUST redone/upgraded w new crazy motor (pump gas)
Recent Competition History

HUGE visibility when taken/driven ANYWHERE WILL make an amazing promotional vehicle for ANY business and you could write it off!
Performance Data

Class: track day street car
Weight: 1900 lbs
Engine

Engine Builder: DART
Manufacturer: DART/AFR/HOWARDS/CANTON
Type: small block chevy stroker
Displacement: 423
Horsepower: approx 600+ 93 octane pump
Torque: over 500+
Induction: normally aspirated with Holley Ultra Billit Carb
Heads: Air Flow Reasearch 210/220 big valve newest version 2013
Block: DART SHP
Main Caps: Splayed 4 bolt BILLIT DART
Crankshaft: FORGED 4340 3.875 inch
Connecting Rods: FORGED 4340 6 inch
Pistons: ROSS FORGED 4.165 inch
Camshaft: HOWARDS ROLLER CAM BIGGEST W VACUUM CUSTOM
Valves: 2.1 inch
Valve Train: 1.6 inch Stainless Roller Rocker w HOWARDS pushrods
Flywheel: SFR FLEXPLATE
Exhaust: CUSTOM HEADERS CUSTOM EXHAUST CERAMIC COATED
Total Time: zero
Races: zero
SFI DAMPER AND FLEXPLATE, BEST Canton oil pan w ACCUSUMP VICTOR JUNIOR INTAKE
Fuel System

Fuel Tank
Manufacturer: CUSTOM MADE SETUP
Capacity: 14.7 gallons
Fuel Pump: mechanical
Fuel Type: premium pump gas
Oil/Water System

Radiator: DUAL side pod with 4 electric fans
Water Rad Location: side pods
Water Pump: electric high volume but can do belt too if desired
Oil Cooler: trans oil cooler in radiator, 13 quart oil system
Oil Cooler Location: in radiator for trans
Electrical System

Ignition: HEI 65,000 volt 8.5mm wires
Alternator: chrome
Battery: 770 CCA
Data Logger: yes for quarter mile, 0-60mph, HP, top speed, distance etc..
Computer: Data Aquistion otherwise Carb and HEI only needed
Transmission
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
[MENTION=5]Mook[/MENTION]

isn't this someone on here?


1986 chevy camaro stock suspension drag car - $8500 (NORTHWEST)


00S0S_929kzzamfCT_600x450.jpg

1986 Chevy Camaro stock suspension Drag car (ROLLER)
Full roll cage certified to 8.50'S tag good to 2014,Taylor battery box rear mounted, On and Off switch with shut down relay, Auto Meter gauges scs cheetah shifter , MSD 7531 digital 7,Has Turbo 400 and power glide cross member, Car is set up for small block Chevy,Drive shift included,
Hooker Super Comp headers,Bullet mufflers, 9" bolt in rear suspension with 4:10 gear on a spool, Alston Anti roll bar, adjustable control arms, Wilwood rear disc brakes, Lakewood shocks and airbags,
Weld magnum drag rims rear with 15x8 with mt 29.5x 9.0 slicks (NEW), front 15x4 mt 27.5 tall front runners(NEW)
stock gas tank with sump Barry Grant 400 pump, with Barry Grant filter,-12 line from tank to pump with - 10 line going to front of car to a Barry Grant 4 port regulator,Also comes with one Nos bottle, car has full interior in nice shape, stock dash all factory lighting works properly, turn signals,brake lights,head lights work. Car is street legal has a clear Illinois title, and can be licenses to drive on the street. Car has very nice paint with exception of a few chips on front lower spoiler. Your gain is my loss must sell.
$8,500
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
this is neat.

All Motor 01' LS1 Z28-402" LS2, TH400, 12 Bolt, Turn Key Low 10's! - $1 (Bartlett, IL)


00909_4Q4IR70tQhB_600x450.jpg

Hey guys!

Up for sale is another toy! 2001 Camaro Z28 Hardtop- 24K miles on body.

This is a fun track ready car that needs nothing! Race it or beat up cars on the street!

This is a VERY VERY VERY nice car. Pics don't do it justice!


Z28 vs Formula off sportman tree - YouTube

Engine
- LS2 Aluminum Block 402 Cubic Inch
- 12 to 1 Compression
- 241 Stage 3 RGR Heads (Speed Inc. Heads)
- 247/254 Custom Grind Comp Cam
- LS7 Lifters
- Rebuilt LS1 Rockers
- Comp Springs
- Comp Hardened Push Rods
- Diamond Pistons
- Eagle crank
- Eagle Rods
- Completely Forged Crank and Internals
- 90/90 F.A.S.T. Intake Setup,
- 36 lb Injectors
- 1 7/8 Hooker Long-Tube Headers
- Custom SPEED Inc. True Duals Exhaust with 3inch Magna-flow Bullets
- SLP's Ram Air • cold air intake
- 255 L Walbro Fuel Pump and New Fuel Filter


Front Suspension
- UMI K-Member
- UMI Adjustable A-Arms
- Front End is Tied Down W/ MADMAN Adjustable Travel Limiters
- STRANGE Double Adjustable Front Shocks
- MADMAN Manual Steering Rack
- SJM ABS Delete Kit

Transmission
- TH400 built by DRC Transmission with Trans Brake - Reverse Manual Valve Body Transmission
- Pro Ratchet B&M Shifter with Line-Lock Button
- 5500 Stall Ultimate Converter Concepts Torque Converter
- BMR Torque Arm Relocate Mount with Adjustable BMR Torque Arm
- SPOHN Drive Shaft Loop
- BMR Race Trans Cooler, TCI Flex Plate, SJM Line Lock

Rear Suspension
- STRANGE 12 Bolt w/ Spool, 4.11 Gears 33-Spline RACE PREPPED Axles
- UMI Lower Double Adjustable Control Arms
- SPOHN Rear Drag Bar
- Comp. Engineering Rear 3 Way Adjustable Shocks
- BMR Adjustable Pan Hard Bar
- Stock Rear Springs

Brakes
- Sure Stop Front and Rear Rotors
- Cross Drilled and Slotted Rotors - Hawk Performance Pads - 4,000 Miles on Brakes

Wheels and Tires
- Weld racing Drag-lites front 15x3.5 (Clean no blemishes, 300 miles)
- Weld Racing Drag-lites rear 15x10 (Clean no blemishes, 300 miles)
- 28X10.5 Mickey Thompson ET Drag

Interior
- VFN Pin-On Light-Weight Stock Style Hood(Painted), With Racecraft Custom Mount Rails with DZUS Fastners
- Rapter Shift Light w/ Autometer Tachometer
- Kirkey Pro Race Seats w/ 5 Point Harnesses
- Light Weight Speed Inc Carpeting (saves 37 lbs)
- No AC/Heat, Cruise or Windshield Wipers
- No T/C, Cruise, ABS, No Seat belts Only Race Harnesses
- Radio Has Been Removed, All Speaker and Wires Have Been Removed.
- Car Has Major Weight Reduction (NO AIR-BAGs)
- 6-Point Wolfe Mild Steel Bolt in Cage


Miscellaneous
- Car Made 470 RWHP with the new TH400 - Car Made over 500RWHP with the original 6-speed Transmission
- Car Went 10.2 @ 130MPH in the 1/4 mile. DA was 2300'
- Vehicle has passed Illinois emissions with the current combo.
- (Speedometer cable removed due to TH400 transmission) can be fabricated for speedo to work
- This Car is a Purpose Built Light Weight Bracket Racer, 10.0 Class.
- Car Was Built and Tuned by SPEED Inc. in Schaumburg, IL 60193
- Motor Has less than 500 Miles Since Build, and 20 Track Passes.
- Transmission and converter have less than 200 Street Miles and 15 Track Passes.

This car has SO much more potential!! Car has a 9.9-10.0 pass in it the way it sits.

Obviously with a bigger cam, better heads, and a speed density tune deep 9 second passes are no problem.

Car needs nothing the way it is. Turn key and go to track or drive on street.
Btw, this thing on the street is SOOOO much fun!

$18,500 or will consider trades plus cash on your end.

Call or Text me @ 847-420-3151 with any questions!

Thanks,
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
terminator for 14k


2003 Mustang Cobra - $14500 (Elgin)


00u0u_4qk5r82usjV_600x450.jpg

Up for sale is my 2003 mustang cobra supercharged. It has about 111000 miles. Can runs string. Has a smaller pulley, intake, bassani exhaust, 17x10.5 rear with 315/35 drag radials. Took the car to the track last week hit mid 12's . With minor upgrades car would be in the 11'S. Hate to sell the car but have 2 kids that are starting to grow. Text me at 224three25six104
 

Yaj Yak

Gladys
TCG Premium
May 24, 2007
122,148
87,664
Niche score of 2,363
[MENTION=1983]Outlaw[/MENTION] needs this.

1995 Mercury Grand Marquis V10 2 Turbos Sleeper Drag Car Cruiser Trade - $6800 (Spring Grove)

1995 Grand Marquis. Has a 2003 Excursion V10 motor in it with 30k miles with a 4R70W trans with a Beaumann transmission controller. It has hidden rebuilt (0 passes) Garrett Twin Turbos, est 470ish rwhp. Exhaust is open by crossmember, has block-off plates to dump it out of the rear. Skinnys in the front with Hoosiers out back (1 should be replaced). The car currently has a trans issue which happened after it returned from having the turbos rebuilt. It shifts perfect first to second but will not shift out of second. I have heard limp mode, selanoid, or a broken 2nd shaft. I do NOT want to sell the car at all, but will not be able to enjoy it this summer. So, if it doesn't go for what I want, I'll keep it and fix it, NO PROBLEM. Understand that before making an offer. Obviously I will not be posting a full description for this car, will give more info when you are standing here with cash or your trade. Its a great cruiser, strip, street, sleeper car. $6800 cash or $7500 trade. Looking for a Corvette, SRT4, cummins, duramax, truck. This is a sleeper, cruiser, street rod, drag car, etc. 262 two three 7 41four 2 call or text
uq4n.jpg

y12w.jpg

nzo9.jpg

5hy8.jpg

yt6n.jpg







and a link for [MENTION=5]Mook[/MENTION]


1995 Mercury Grand Marquis V10 2 Turbos Sleeper Drag Car Cruiser Trade
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info